DA2545 - Rear Spring Mount Bracket C-Chassis Leg the pinion disengages and returns

the pinion disengages and returns to its rest position

Supplied complete with its mounting bracket

supplied as a pair of blocks that fit between the axle and the spring seats to raise ride height by 50 mm

The bush is pressed into the radius arm eye and forms the compliant joint between the radius arm and its mounting at the axle

This low-pressure hose carries fluid from the reservoir to the inlet of the power steering pump

DA2545 - Rear Spring Mount Bracket C-Chassis Leg the pinion disengages and returnsRear Spring Mount Bracket the chassis mounted bracket that forms the seat for a rear coil spring. It locates the top of the spring against the chassis and carries the suspension load at that corner. The bracket suits either the left or right hand side and is a common repair item where the original has corroded. Pressed steel. Replace when the mounting has rusted or distorted, to restore correct spring seating.